Thickener From Factory with SGS Certificate

Model NO.: PTF Environmental Protection: Yes Kind: Fixing Agent Application: Pretreatment Auxiliary, Textile Printing Auxiliary, Dying Auxiliary, Post-Processing Auxiliary pH Value: 6~7 (Applicable Scope Is Between 4~12) Trademark: Lanxun Specification: SGS HS Code: 3204130000 Certification: SGS Color: White Appearance: Liquid Style: Organic Pigment Content of Solid: 36±1% Transport Package: 50kg/Barrel Origin: Guangdong, China (Mainland) Product description
 
I. Quality parameter
 
(1) Appearance: light yellow viscous liquid
 
(2) PH Value: 6~7 (applicable scope is between 4~12)
 
(3)content of solid:36±1%
 
(4) Thickener effect: add 1.0%~1.5 percent of thickener effect into pure water and mix them into paste, use a NDJ-1 type viscometer measured the viscosity which should be kept at 65000MPA.
 
II. Product features:
 
(1) It has obvious economic benefit, one ton of Acrapon-A paste can be substituted by only 10 to 20 kilograms of this product and the cost is reduced by more than 70 percent, and compared with PTF thickener from UK, the cost is reduced by more than 50 percent;
 
 (2) The paste is stable, after mixing, it can be store in a sealed container for 10 days without demixing, skinning, or thinning down.
 
 (3) It does not need to change the original printing process, the color fastness is enhanced, the pattern profile is clear, and the luster is bright.
 
III. Application method
 
Water:        70%~80%
Binder:        10~20%
PTF            1%~1.5%
Colorful paste        X
                         
                  100
 
IV. Notice:
 
 (1) PA is similar to PTF in properties, its thickening effect has great relationship with water quality (the hardness of the water should be lower than 200PPM), if the water is harder, more product should be used and the mixing time should be longer.
 
 (2) It cannot be used together with cross-linking adhesives, do not add cross-linking agents such as EH and FH into the paste.
 
 (3) Do not stored it in a place where the temperature is above 40 centigrade or under 0 centigrade..
 
 (4) The shelf life of the product is 6 months under room temperature. 

Contact us if you need more details on Printing Thickener. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Thickener、Pigment Printing Thickener. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : PTF/PA Pigment Printing Thickener