Environment-Friendly Water-Based Metal Paint

Model NO.: wk18 Printing Type: Spray Printing Performance: Dry Color: Full SGS: RoHS,Europen Standard MOQ: 100kg Specification: SGS HS Code: 3204170000 Type: Water Based Ink Ink Drying: Penetration Drying Component: Additional Material Environment-Friendly: Alcohol Based Package: Iron Bucket Trademark: Lanxun Origin: Foshan
 WK-series environment-friendly water-based Metal Paint

Performance:
This product is environmentally friendly water-based paint, pollution-free. Has excellent adhesion, solvent resistance, boiling, flow is good. For a variety of iron, aluminum, stainless steel, electroplating and other metal and bakelite products, particularly for applications that require high-gloss, high hardness and toughness, good surface coating requirements.
Usage:
1, all the spray equipment must be alcohol or pure water, deionized water, tap water clean. This product does not allow solvents or residues of benzene pollution.
2, the product after opening the lid should be fully stirring slowly add water, deionized water, tap water against the thin, and then stir with a 200-300 mesh filter even after the filter before use.
3, the workpiece surface must be pre-construction, to oil, dirt, keep it clean.
4, the construction environment to be clean and bake.
5, wait 5-10 minutes after spraying, before entering the drying tunnel.
Shelf life:
Products should be ventilated, cool, dry conditions and packaging intact storage. Product shelf life of six months.
Tips and Notes:
The above data is only our experience, customers in the actual application should be based on the production environment, conditions and equipment to adjust the specific circumstances, and the first for the sample test before production.

Applications	stainless steel, aluminum, iron and other metal products
Resin Series	water-soluble acrylic resin
Color	standard color, can be prepared in various colors according to customer requirements
Gloss (60 °)	≥ 85 °: half or full matte light
Before the oven	Put 5 to 10 minutes
Baking	170 ° C/30 min   180 ° C/20 minutes
dilution rate	water, deionized water or tap water 20 to 30%
Spraying Viscosity (Tu 4 cup)	30 to 40 seconds
dry film thickness	20 to 25 microns
Adhesion	A: network test, B: Cupping, C: T-bend     pass
pencil hardness	≥ 2H
Boiling water resistance test	100 ° C/1H  pass
Resistant to salt spray test	72 hours pass
Acid test	5% CaOH solution immersion, 5% HC1 solution immersion (20 ° C 24 hours)   pass
solvent test	methyl ethyl ketone/ 1kg   hammer wipe  pass

Contact us if you need more details on Metal Paint. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Paint、Metal Paint Ink. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Metal Paint